ELECTRICAL PANEL AND SUBPANEL REPAIRS AND REPLACEMENTS!
Schedule a Panel Upgrade in Poplar Grove, Rockford, Belvidere, or Boone County, IL
If you are planning to expand your office or install new equipment, you’ll need to see if your
electrical panel can handle your new devices. If it can’t, get a subpanel or panel upgrade from Atkins Electric Company. Well test your system and use an infrared camera to look for wiring
issues to make sure your new panel installation is up to code.
Contact us now to learn more about
our panel and subpanel upgrade services, available in Belvidere, Rockford, Poplar Grove,
Machesney Park, Harvard, Woodstock, Janesville, Crystal Lake, Belvidere, and the
Boone County surrounding areas. Need help figuring out whats going on with your
homes electrical system? Our team has answers! Schedule today:
TOP SIGNS IT'S TIME FOR A PANEL UPGRADE
Is your panel getting older? You may be wondering if it’s time to replace it. You should
consider a panel upgrade if you:
1. Your energy bills are getting more expensive.
2. Your circuit breakers are constantly tripping.
3. You’re experiencing frequent power outages.
4. Your lights are flickering.
5. Your appliances are not working properly.
6. You notice burning smells coming from the panel.
7. Your panel is more than 20 years old.
8. Your panel does not have a main shutoff switch.
9. Your panel has loose connections.
10. Your panel has exposed wires.
If any of these signs sound familiar, schedule a panel or subpanel
upgrade today. And be sure to ask for a free estimate.
Prevent Future Issues With Your Electrical Panel
1. Have a professional inspect your electrical panel regularly. It is best to have a
qualified electrician inspect your panel annually to ensure it is working correctly and is
up to code.
2. Make sure all connections are secure. Loose connections can cause electrical fires. Make sure all connections are tight and secure.
3. Replace any worn-out or outdated electrical components. Over time, components can wear out or become outdated. Replace them promptly to avoid any potential issues.
4. Never overload your electrical panel. Overloading your panel can cause it to overheat and potentially cause a fire.
5. Keep your panel clean and free from debris. Dust and dirt can cause short circuits, so make sure to keep your panel clean and free from any debris.
2. Make sure all connections are secure. Loose connections can cause electrical fires. Make sure all connections are tight and secure.
3. Replace any worn-out or outdated electrical components. Over time, components can wear out or become outdated. Replace them promptly to avoid any potential issues.
4. Never overload your electrical panel. Overloading your panel can cause it to overheat and potentially cause a fire.
5. Keep your panel clean and free from debris. Dust and dirt can cause short circuits, so make sure to keep your panel clean and free from any debris.
WHEN SHOULD YOU REPLACE YOUR PANELS?
The general rule of thumb is to replace solar panels every 25-30 years. However, the
exact lifespan of your panel system will depend on a variety of factors including the type
of panel, the climate, and the amount of direct sunlight the panels receive. If you’re
concerned about the lifespan of your solar panel system, it’s best to contact a
professional solar installer for more information. If any of these are present in your
system, contact us now for fast and efficient subpanel replacement services.
Speak to a Master Electrician!
Call to Schedule an Appointment Today!
PANELS & BREAKERS FREQUENTLY ASKED QUESTIONS
What is the 80% rule for breakers?
The 80% rule for breakers states that the breaker size should not exceed 80% of the total load connected to it. This ensures that the breaker is not overloaded and that the circuit is safe.
The 80% rule for breakers states that the breaker size should not exceed 80% of the total load connected to it. This ensures that the breaker is not overloaded and that the circuit is safe.
What are the signs of a bad breaker?
1. Breaker won’t stay in the on position.
2. Breaker trips frequently.
3. Breaker is hot to the touch.
4. Breaker has visible signs of wear or damage.
5. Sparks or arcs coming from the breaker.
Do breakers need to match the panel brand?
No, breakers do not need to match the panel brand. However, they must be compatible with each other, as some breakers are only compatible with specific panel brands.
No, breakers do not need to match the panel brand. However, they must be compatible with each other, as some breakers are only compatible with specific panel brands.
Can tripping a breaker damage the breaker?
Tripping a breaker can damage the breaker if it is overloaded. If the current draw is too high, it can cause the contacts on the breaker to overheat and become damaged. If this happens, the breaker may no longer be able to protect the circuit from overloads.
Tripping a breaker can damage the breaker if it is overloaded. If the current draw is too high, it can cause the contacts on the breaker to overheat and become damaged. If this happens, the breaker may no longer be able to protect the circuit from overloads.
Can tripping a breaker damage the breaker?
Tripping a breaker can damage the breaker if it is overloaded. If the current draw is too high, it can cause the contacts on the breaker to overheat and become damaged. If this happens, the breaker may no longer be able to protect the circuit from overloads.
Tripping a breaker can damage the breaker if it is overloaded. If the current draw is too high, it can cause the contacts on the breaker to overheat and become damaged. If this happens, the breaker may no longer be able to protect the circuit from overloads.
What are the main two causes of failure of circuit breaker?
1. Overloading: Circuit breakers are designed to protect circuits from an overload of electricity, which can cause a circuit to overheat, resulting in damage or even fire. When a circuit breaker is overloaded, it will trip and disconnect the circuit to prevent any further damage.
2. Short Circuit: A short circuit occurs when the hot wire comes in contact with the neutral wire, creating a direct path for electricity to flow through without going through the load. This causes the circuit breaker to trip and disconnect the circuit in order to protect it from further damage.
1. Overloading: Circuit breakers are designed to protect circuits from an overload of electricity, which can cause a circuit to overheat, resulting in damage or even fire. When a circuit breaker is overloaded, it will trip and disconnect the circuit to prevent any further damage.
2. Short Circuit: A short circuit occurs when the hot wire comes in contact with the neutral wire, creating a direct path for electricity to flow through without going through the load. This causes the circuit breaker to trip and disconnect the circuit in order to protect it from further damage.
What are the rules for the breaker box?
1. Make sure you turn off the power at the main breaker before attempting any work.
2. Never exceed the amperage rating of any circuit.
3. Never overload the circuit breaker.
4. Do not use the wrong size breaker.
5. Make sure all connections are secure and properly tightened.
6. Do not use aluminum wire with a copper breaker.
7. Do not use a two-pole breaker in a single-pole outlet.
8. Never mix wire sizes in the same circuit.
9. Make sure all wires are properly insulated.
10. Label all breakers for easy identification.
Why is my circuit breaker not tripped, but no power?
If the circuit breaker is not tripped, then the problem is likely not due to the breaker itself. Check to make sure the power switch is on and that all connections are secure. If the power switch is on and all connections are secure, then the problem may be due to a fault in the wiring, a blown fuse, or a faulty appliance.
If the circuit breaker is not tripped, then the problem is likely not due to the breaker itself. Check to make sure the power switch is on and that all connections are secure. If the power switch is on and all connections are secure, then the problem may be due to a fault in the wiring, a blown fuse, or a faulty appliance.
What not to do on a breaker panel?
1. Do not add or remove a breaker without turning off the main power switch first.
2. Do not overload a circuit by adding too many appliances to one breaker.
3. Do not use a multimeter to test the voltage of a circuit without turning off the main power switch first.
4. Do not work on the breaker panel with wet hands or when standing in water. 5. Do not use any tools or objects, such as screwdrivers or metal tools, to pry open a breaker panel.
1. Do not add or remove a breaker without turning off the main power switch first.
2. Do not overload a circuit by adding too many appliances to one breaker.
3. Do not use a multimeter to test the voltage of a circuit without turning off the main power switch first.
4. Do not work on the breaker panel with wet hands or when standing in water. 5. Do not use any tools or objects, such as screwdrivers or metal tools, to pry open a breaker panel.
What is a common defect in a main breaker panel?
A common defect in a main breaker panel is a loose or worn connection, which can cause the breaker to trip or fail to trip when it should. Loose connections can also lead to arcing and sparking, which can cause a fire hazard.
A common defect in a main breaker panel is a loose or worn connection, which can cause the breaker to trip or fail to trip when it should. Loose connections can also lead to arcing and sparking, which can cause a fire hazard.
What is a common defect in a main breaker panel?
A common defect in a main breaker panel is a loose or worn connection, which can cause the breaker to trip or fail to trip when it should. Loose connections can also lead to arcing and sparking, which can cause a fire hazard.
A common defect in a main breaker panel is a loose or worn connection, which can cause the breaker to trip or fail to trip when it should. Loose connections can also lead to arcing and sparking, which can cause a fire hazard.
How many breakers can I have in my electrical panel?
The number of breakers you can have in your electrical panel will depend on the size and type of panel you have. In most cases, a standard residential panel will accommodate up to 40 single-pole breakers or 20 double-pole breakers.
The number of breakers you can have in your electrical panel will depend on the size and type of panel you have. In most cases, a standard residential panel will accommodate up to 40 single-pole breakers or 20 double-pole breakers.
How many breakers can I have in my electrical panel?
The number of breakers you can have in your electrical panel will depend on the size and type of panel you have. In most cases, a standard residential panel will accommodate up to 40 single-pole breakers or 20 double-pole breakers.
The number of breakers you can have in your electrical panel will depend on the size and type of panel you have. In most cases, a standard residential panel will accommodate up to 40 single-pole breakers or 20 double-pole breakers.
What breakers shall not be installed in panelboards?
Circuit breakers that are not listed for use in panelboards should not be installed in panelboards. This includes breakers made for other applications such as motor control centers, industrial control panels, and other similar applications.
Circuit breakers that are not listed for use in panelboards should not be installed in panelboards. This includes breakers made for other applications such as motor control centers, industrial control panels, and other similar applications.
How do I know if my panel can accept tandem breakers?
Check the panel label or consult the manufacturers instructions or website. You can also contact a licensed electrician who can provide professional guidance on your specific electrical needs.
Check the panel label or consult the manufacturers instructions or website. You can also contact a licensed electrician who can provide professional guidance on your specific electrical needs.
Areas we serve:
We provide quality residential electrical repairs to homeowners in Belvidere, Rockford,
Poplar Grove, Machesney Park, Harvard, Woodstock, Janesville, Crystal Lake, Belvidere,
and the Boone County surrounding areas.
Speak to a Master Electrician!
At Atkins Electric, were known for our friendly service and top-quality electric work.
Whether its Mains panel upgrades or full-service electrical work on your new
residential or commercial build, you can always expect exceptional results when
you count on Atkins Electric. Call today, and let’s get started.
Request Service Now
* Indicates required questions
Request Service Now
* Indicates required questions
“Brett did a fantastic job taking care of all the electrical work for my basement remodel. His suggestions were spot on. The work was done very professionally and finished on time.”
